Commercial Plumbing in Putney

Compare quotes from multiple verified Putney plumbers

Your enquiry goes straight to the plumbers you pick — no middleman fee

1 Describe your job & contact details

Describe the job

Add photos (optional)

+ Add photos

Up to 4 photos. A clear photo of the problem helps plumbers quote accurately.

Preferred availability

Your name Email Phone (optional)

Your details are sent only to the plumbers you pick. We keep a brief record of the request for service quality.

2 Choose plumbers None available yet

No verified plumbers cover this in Putney yet.

Find verified commercial plumbing and heating engineers covering Putney — for shops and restaurants on the High Street, offices and riverside developments, and the compliance that comes with non-domestic premises.

✅ Checked before listing — identity, insurance, trading presence, Gas Safe (where relevant).
✅ Workmanship guarantee badges on listings — 1, 3, 6 or 12 months

How we verify →

Commercial engineers set their own rates and response times — confirm scope, compliance and price before booking.

Contact a verified Putney commercial engineer ↓

Are you a plumber covering Putney?

Use the search above to find a local expert

Coverage: Putney SW15 — High Street retail and food, Upper Richmond Road offices, Embankment and riverside premises. Confirm your postcode when you call.

What this covers: commercial hot and cold water, drainage and grease management, water heating and plant, TMVs and backflow protection, and commercial gas work.

Gas category check: property type alone does not decide the required Gas Safe categories. Check that the engineer’s ID card covers the actual appliance, work, fuel, pipework and operating scope; non-domestic categories are required where the work itself falls within non-domestic scope.

Costs: commercial work is quoted per site; agree scope and compliance deliverables up front.

Gas Safe categories must match the work

Gas Safe registration is task-specific. Property type is not the sole test: a domestic appliance at a business address may remain within domestic appliance scope, while larger pipework or non-domestic plant can require non-domestic categories. The engineer’s Gas Safe ID card must cover the particular appliance, work, fuel, pipework and operating scope.¹ Commercial catering work also needs the relevant catering categories. CODNCO1 is one domestic-to-non-domestic changeover route, not a universal starting qualification; other valid commercial core routes exist. Always check the card categories against the actual plant before work begins. If you smell gas, do not operate electrical switches or use naked flames; leave the premises and call the National Gas Emergency Service on 0800 111 999 from outside.²

Water safety and process-specific compliance

Commercial work often involves dutyholder, process and continuity controls that must be assessed for the particular premises and fitting:

Backflow protection. Under Schedule 2 paragraph 15 of the Water Supply (Water Fittings) Regulations 1999, each fitting or process must have protection adequate for the highest applicable downstream fluid category.³ The category is determined by the water use and contamination risk at that connection, not by labelling an entire café, restaurant, clinic or home. Device limits are not interchangeable: Water Regs UK lists a single check valve for category 2, a double check valve for category 3, an RPZ valve up to category 4, and appropriate air-gap arrangements for category-5 risks.³ The engineer should identify the process, assign the fluid category and specify suitable protection.

Legionella. Employers and people who control premises or relevant water systems must assess and manage reasonably foreseeable Legionella risks under health-and-safety law; HSE guidance and ACOP L8 explain how dutyholders can comply.⁴ Stored hot water, showers and seldom-used outlets can require controls, but a simple assessment may show that risk is low and already managed, with review rather than elaborate measures.

Drainage, grease and shutdown planning. Food premises should manage fats, oils and grease and assign responsibility for any interceptor or grease equipment. Before interrupting toilets, sinks or hot water, agree isolation, working hours, temporary provision, phased work, testing and documented recommissioning. Drain responsibility depends on the precise location, adoption and configuration: Thames Water is generally responsible for public sewers and qualifying lateral or shared sewers, while private sole-use drains within the site boundary are generally the property or site responsibility; confirm the actual arrangement.⁵

Putney’s hard water can contribute to scale in equipment that heats or evaporates water, but the rate and remedy depend on the equipment, temperature, use, water quality and manufacturer’s instructions. Commercial softening or scale protection should be specified only after that assessment, not assumed to be a universal or locally prevalent requirement.⁶

Find a verified commercial engineer by district

Postcode coverage varies by listing — confirm yours when you call.

Putney High Street (SW15) — a restaurant or shop with flats above may need isolation outside trading hours, temporary sink or toilet provision, grease-equipment access and coordination among the commercial tenant, residential occupiers, landlord and freeholder, followed by documented recommissioning.
Upper Richmond Road & town centre offices (SW15) — in mixed-use blocks, responsibility for plant, risers and drainage should be confirmed among the tenant, commercial landlord, freeholder and FM contractor before shutdown.
Putney Embankment & riverside (SW15) — leisure or rowing facilities may have seasonal or infrequently used showers and outlets; the dutyholder’s Legionella assessment should determine proportionate flushing, temperature and review controls.
Riverside developments (SW15) — commercial units in managed blocks may share plant or services; access, isolation and responsibility should be agreed with the relevant block or FM contact.
Roehampton (SW15) — schools, university or community sites may have larger or more complex systems, so shutdown, temporary provision, records and handover should be agreed for the actual site.
Southfields edge (SW18/SW15) — small commercial units should be assessed by fitting, process and equipment rather than assumed to share one fluid-risk category or scale requirement.

What commercial plumbing covers

Commercial hot and cold water systems, TMVs and thermostatic control
Backflow risk assessment and protection for each fitting or process to the applicable fluid category
Legionella risk assessment support and control measures
Commercial water heating, plant and commercial gas (correct Gas Safe categories)
Kitchen and food-service drainage, grease-equipment inspection, sizing and maintenance responsibility
Equipment-specific softening or scale protection where water quality and manufacturer instructions justify it
Reactive repair, planned preventative maintenance and contract servicing, including shutdown plans, temporary provision, testing records and documented handover

What commercial plumbing costs in Putney

Editorial estimate only, observed across independent commercial contractors in early 2026 — not regulated rates, market data or a published cost survey. Commercial work is priced per site and per contract; Putney is outside the central Congestion Charge zone but inside the London-wide ULEZ (all boroughs since 29 August 2023).⁷

Job	Typical range
Commercial call-out / first hour	£90–£200
Legionella risk assessment (small premises)	£200–£500
RPZ valve test/certification	£120–£300
Grease trap supply + install	£400–£1,500+
Commercial water softener (catering)	£600–£2,500+

Figures are no substitute for a written, site-specific quote from the engineer attending.

Frequently asked questions

Possibly. A person may hold both domestic and non-domestic competencies, and property type alone is not decisive. Check the Gas Safe ID card for the exact appliance, work, fuel, pipework and operating scope; commercial or catering categories are required where the actual work falls within those categories.

Assess the particular fitting or process. The fluid category follows the water use and contamination risk, not the premises label. A single check valve, double check valve, RPZ valve and air gap have different protection limits, so the engineer must select a device or arrangement suitable for the assigned category.

Employers and people who control premises or relevant water systems must assess and manage reasonably foreseeable Legionella risk. Stored hot water, showers or infrequently used outlets may require controls, but a simple assessment may establish low risk with proportionate measures and periodic review.

Responsibility depends on the pipe’s precise location, adoption and configuration. Thames Water generally covers public sewers and qualifying lateral or shared sewers; private sole-use drainage within the site boundary is generally the property or site responsibility. A commercial engineer can help identify the affected section.

Putney’s hard water can contribute to scale in equipment that heats or evaporates water, but the plumber should check the appliance, usage, water quality and manufacturer’s instructions before specifying softening or scale protection. Whether it is worthwhile depends on that site-specific assessment.

—

Why verified plumbers — not a general directory

For a business, the wrong contractor can create safety, compliance, insurance or enforcement problems. Every listing here is checked before it goes live and re-verified annually: we confirm the business is legitimately trading and verify the named contact, we check evidence of public liability insurance, and we confirm the engineer covers Putney’s SW15 postcodes before a profile is approved. For gas work we confirm Gas Safe registration directly with the Gas Safe Register. You should also check that the ID card categories match the actual appliance, work, fuel, pipework and operating scope, including non-domestic or catering categories where required. Profiles may be suspended or removed if credentials lapse or credible concerns are raised — see the full verification process →. Engineers pay a flat monthly listing fee; there’s no pay-to-play ranking and no per-enquiry middleman fee — your enquiry goes straight to the engineer.

Related areas

Verified engineers across Putney’s neighbourhoods, including:

East Putney
Lower Richmond Road
Putney Embankment
Putney Heath
Putney High Street
Putney Lower Common
Roehampton
Southfields (edge)
West Putney

Related services

Other verified plumbing services in Putney:

Related guides

Commercial work in Putney can involve task-specific Gas Safe categories, fitting-by-fitting backflow assessment, proportionate Legionella controls and planned shutdowns. A verified commercial engineer should match qualifications and protection to the actual appliance, process, system and dutyholder arrangements.

Contact a verified Putney commercial engineer ↑

← Back to all Putney plumbing services

Last reviewed: July 2026 by Adiel Khan — SFEDI-accredited business advisor, 20+ years’ experience (South East Enterprise Ltd) and operator of VerifiedPlumbers. LinkedIn ↗*

This page is checked for compliance and regulatory accuracy against the Gas Safe Register, the Water Supply (Water Fittings) Regulations 1999 and Water Regs UK guidance, HSE Legionella guidance and ACOP L8, Thames Water, the National Gas Emergency Service and TfL. Source links are provided within this page where relevant.

Sources & further reading

¹ Gas Safe Register — ID card categories; property type is not the sole criterion and categories must match the specific work and appliance. https://www.gassaferegister.co.uk/gas-safety/the-gas-safe-id-card/the-gas-safe-id-card-categories/

² National Gas — Emergency contacts (0800 111 999, 24/7). https://www.nationalgas.com/emergency-contacts

³ Water Supply (Water Fittings) Regulations 1999, Schedule 2 paragraph 15 — backflow protection to the highest applicable downstream fluid category; Water Regs UK — device and arrangement limits. https://www.legislation.gov.uk/uksi/1999/1148/schedule/2/paragraph/15 · https://www.waterregsuk.co.uk/topics/different-types-of-backflow-prevention/

⁴ HSE — Legionella risks in the workplace (employers and people in control of premises; proportionate risk assessment and controls). https://www.hse.gov.uk/legionnaires/workplace-risks.htm

⁵ Thames Water — Sewer pipe responsibility (public sewers and shared drains; 2011 transfer). https://www.thameswater.co.uk/help/water-and-waste-help/sewer-flooding/sewer-pipe-responsibility

⁶ Thames Water — Hard water (London supply classified hard; chalk aquifer). https://www.thameswater.co.uk/help/water-and-waste-help/water-quality/hard-water

⁷ Transport for London — Ultra Low Emission Zone (London-wide since 29 August 2023). https://tfl.gov.uk/modes/driving/ultra-low-emission-zone